Flame Monitoring System

F130I
  • Flame monitoring device for main and Ignition flame ;
  • Ionization based flame monitoring;
  • Approved for continuous operation with ionization;
  • Approved for intermittent operation with UV tubes and LDR sensors;
  • Two-channel system with electronic self-monitoring;
  • LED based status display;
  • Plug-in module for top hat rail assembly;
  • Designed for installation in control panels;
  • No modifications needed for country-specific mains frequencies
  • SIL 3 as per DIN EN 61508-1-7 
Tecnical Data

Power supply voltage:

230 VAC +10 % -15 %
120 VAC +10 % -20 %

Flame and signal contact:Floating
Mains frequency:47 Hz … 63 Hz
Safety time "operation":tVoff ≤ 1 s
Mode of operation:Continuous operation
Protection class:IP20
Operating temperature:-20 °C … +60 °C
Dimensions:114 x 120 x 45 mm (TxHxB)
Weight:0,5 kg

Approvals:



EC type-examination certificate according to 2014/68/EU (Pressure Equipment Directive)
  • DIN EN 298:2012
  • DIN EN 13611:2011
  • DIN EN 60730-2-5:2011
  • DIN EN 60730-1:2012
  • DIN EN 746-2:2011 for process burners

 

SIL 3 Confirmation

  • DIN EN 61508 part 1-7

 

CE Declaration of Confomity

  • 2014/68/EU (Pressure Equipment Directive)
  • 2009/142/EC (Gas Appliance Directive)
  • 2014/35/EU (Low Voltage Directive)
  • 2014/30/EU (EMC Directive)

 

ANSI / UL 1998, 2nd Edition in Combination with ANSI / UL 372, 5th Edition and UL353, 5th Edition

 

Purpose

The F130I flame monitoring device is LAMTEC's new safety system, designed specially for monitoring ignition and main flames.The F130I flame monitoring device by LAMTEC provides operators of industrial firing systems and power plants with a reliable high-tech device for flame monitoring.

The F130I uses ionisation to monitor the flame. Optical flame sensors can also be connected to the device. The F130I flame monitoring device is particularly impressive when used for more demanding monitoring requirements, such as monitoring in firing systems with single burner flames. The ionisation-based F130I flame monitoring device has been approved for permanent operation.

The evaluation device may only be operated with the approved flame sensors. The F130I is not designed for the direct switch-off fuel valves. The subsequent signalprocessing must be carried out in the control system, which is adapted to suit the firing system in question.

Selection Criteria

Sensor typeF130I inputFor fuelContinuous operationWavelength range
UV tubesUVGas / OilNo190 … 270 nm
LDR, visibleLDROilNo450 … 800 nm
LDR, visibleLDROilNo400 … 800 nm
IonisationIONGasYes-

F152
  • Flame monitoring device
  • Digital flame frequency evaluation in the range of 10 – 200 Hz 
  • Approved for continuous operation 
  • Plug-in modul for top hat rail mounting 
  • Two -channel system with electronic self-monitoring 
  • LED based status display  
  • Measurement output for intensity 0-20mA
  • No modifications needed for country-specific mains frequencies
  • SIL 3 DIN as per EN 61505-2
Tecnical Data

Power supply voltage:

230 VAC +10 %, -15 %
115 VAC +10 %, -15 %

 

Flame and signal contact:

Changeover switch, floating

 

Mains frequency:

10 Hz ... 200 Hz

 

Safety time "operation":

t ≤ 1 s (standard)

 

Mode of operation:

Continuous operation

 

Protection class:

IP20

 

Operation temperature:

-10 °C ... +60 °C

 

Dimensions:

114x120x45 mm (HxWxD)

 

Weight:

0,5 kg

 

Approvals
(in combination with
FFS07 / FFS08):

 

 

 



 

EC type-examination certificate according to 2009/142/EC (Gas Appliance Directive)

  • DIN EN 298:2012

 

SIL 3 Confirmation

  • DIN EN 61508 Part 2

 

CE Declaration of Confomity

  • 2014/35/EU (Low Voltage Directive)
  • 2014/30/EU (EMC Directive)
  • 2014/68/EU (Pressure Equipment Directive Cat. 4 Modul B+D)
  • 2009/142/EC (Gas Appliance Directive)

 

Type examination certificate Ex Zone 2

Purpose

The F152 is housed in a plug-in module for top hat rail mounting and together with the scanner FFS07 / FFS08 forms a safety device for optical monitoring of burner flames without complicated selection tasks. The flame monitoring device F152 is designed as a two-channel system with electronic self-monitoring. Adaptation to country-specific mains frequencies is not necessary, as they are suppressed by sliding fade-out. It has digital flame frequency evaluation and LED status displays. In addition, the device is supplied with a measuring output for intensity in the range 0-20 mA.

The FFS07 and FFS08 scanners are equipped with sensors for IR or UV range according to customer requirements. The system is suitable for monitoring tasks without high selection requirements for single and multi-fuel burners in heating plants and process furnaces that are operated with oil, gas, biomass, dust or process gases.
The flame monitoring device F152 and the probes FFS07 and FFS08 are certified according to IEC61508 part 2 according to SIL 3 and comply with the standards DIN EN 298 for gas operation and DIN EN 746-2 for process plants. The requirements of the Pressure Equipment Directive (2014/68/EU) and Gas Appliances Directive (2009/142/EC) are also met. An Ex-I certificate for the FFS07 scanner is also available.

Selection Criteria

Type

Spectrum / nm

Preferred application / fuels

FFS 07 / 08 UV-1

260 ... 400

Oil, gas

FFS 07 / 08 UV-4

215 ... 360

Oil, gas (special gases as refinery and  blast furnances)

FFS 07 / 08 IR-1

1.200 ... 2.800

Oil, gas, firing  with high flue gas recirculation, waste gases with yellow color without UV radiation