ETAMATIC

  • Burner sequence control
  • Connects to control system
  • Simple to program
  • 10-bits resolution
  • Can be used from PC
  • Integrated load control
  • Electronic compound, up to 4 channels
  • Integrated leakage test
  • Integrated operated
  • CO/O2 control
Tecnical Data
Electrical power supply:From 115 VAC -15%
 To 230 VAC +10 %    50/60 Hz
Ambient temperature 
Operation:+0 °C … +60 °C
Transport and storage:-25 °C … +60 °C
Resolution per analog input:999 digit, 10 bits
Recommended: run time of the positioning drive:30 s … 60 s
Constant outputs:0 … 10 V >5 kΩ
Load:0/4 … 20 mA < 600 Ω
Digital signal input:14 (The line shall not be longer than 10 m)
Digital outputs:

Main gas 1, main gas 2, oil valves, ignition valves, ignition transformer, fan, oil pump, fault

Number of curve-sets:2 per channel (e.g. for oil/gas combined burner)
BUS coupling:

Via external adapter connected to
LSB for these protocols:

  • INTERBUS-S (Phoenix)
  • PROFIBUS DPModbusEthernet (Modbus TCP)
 

Approvals:

 

 

CE Declaration of Conformity

EC Type Examination Certificate according

TUEV

DVGW

AGA

SAGA System Acceptance Test

Marine Type Approval Certificates GL and LR

EC Type Examination Certificate according to 2009/142/EG

 

 

EC Type Examination Certificate according to 2014/68/EU
(Pressure Equipment Directive)

  • DIN EN 298
  • DIN EN 1643
  • DIN EN 230
  • DIN EN 60730-2-5
  • DIN EN 12067-2
  • DIN EN 50156-1
     

EC Type Examination Certificate according to 2009/142/EG
(Gas Appliance Directive)

  • DIN EN 298
  • DIN EN 13611
  • DIN EN 1643
  • DIN EN 12067-2
     

SIL 3 Confirmation

  • DIN EN 61508 Part 2+3
     

CE Declaration of Conformity

  • 2014/35/EU (Low Voltage Directive)
  • 2014/30/EU (EMC Directive)
  • 2014/68/EU (Pressure Equipment Directive Cat. 4 Mod. B+D)
  • 2009/142/EC (Gas Appliance Directive)
 

System Acceptance Test- EN 50156-1 (TÜV)
 

Marine Type Approval Certificates GL and LR
 

AGA Certified Product – EN298, AS4625, AS4630
Porpuse

Electronic compound regulators and complete burner control units from LAMTEC. These instruments set new benchmarks in the control of combustion systems. Thanks to the wide variety of possible settings and additional hardware and software options, the units can be adapted for nearly all combustion tasks, from simple monoblock burners to complex power stations.

LAMTEC offers a comprehensive range of products, starting with the ETAMATIC for simple combustion facilities, via VMS / FMS for larger installations, all the way to the complete 19″ burner control unit. And all this with a universal operating philosophy. Thus, LAMTEC’s burner controllers cover the entire spectrum from medium to large burners. Integration of many of the functions needed in combustion systems into one instrument saves wiring and commissioning costs. Choosing the FMS or ETAMATIC considerably reduces the number of external units needed, thus creating a price/performance ratio without peers. 

The VMS, FMS and ETAMATIC are tested by TÜV Bavaria. All units comply with the relevant EN standards (EN-298 and EN-230) and thus are licensed across Europe for operation in combustion systems. They are licensed under DIN-DGVW. The integral FMS leakage monitor meets the requirements of DIN V3447 and of prEN1643. The integral output regulator complies with DIN 3440.

Selection Criteria
Function  Communication  Optional

 

  Start-up counter

 

 

   RS232 interface:
     • Operating
     • Maintaining
     • Remote control
     • Storage

 


  CO/O2 control

 

 

  Operating hours counter

 

 

  LAMTEC System Bus (LSB)  

 


  Flame monitoring

 

 

  Burner control unit

 

 

  Control instrumentation connection – options:  
     • INTERBUS-S
     • Profibus
     • Modbus
     • Ethernet

 


  Frequency converter 

 

 

  Compound regulator
     • 4 positioning elements 

 

 


  Start-up assistant

 

 

  Burner firing-rate controller 

 

 


  Plug kits
     • Inverse terminal
     • Terminal with
        elasticity

 

 

  Leakage test