Compact Flame Scanner

F200K

Compact case with integrated flame sensor and switching amplifier
Intensity adjust in multiple steps
Digital circuit design for flame evaluation
Status indication by LEDs 24 VDC operating voltage
Two electronic channel system for fail safe operation and supervision
LED bar flame intensity indication and 4 (0) … 20 mA analog output
LED bar trend indication selectable for an optimum adjustment to the flame direction
Available with Class I, Division 2, Group A, B, C, D, Hazardous Locations

Tecnical Data

Power supply:	24 VDC ± 20 %, ≤ 4,0 W
Output contact:	≤ 42 VDC, ≥ 6 VAC/DC ≤ 0,5 A, ≥ 1,0 mA floating
Frequency range:	10 … 190 Hz (F200K1 …) 10/20/30 … 190 Hz (F200K2 …)
Safety time ‘operation’:	t ≤ 1 s (standard) t ≤ 3 s (on request, at the factory)
Mode of operation:	Continuous operation
Protection class:	IP66 / IP67 EX Zone I IP66 NEMA 4X
Operating temperature EX Zone II:	– 40°C…+75°C (UV-2, UV-3, IR-2) – 40°C… +60°C (IR-1)
Operating temperature EX Zone I:	– 40°C…+ 65°C (UV-2, UV-3, IR-2) – 40°C…+60°C (IR-1)
Dimension:	Total length: 180 mm Diameter: 40/80 mm
Weight:	0,6 kg
Material:	Corrosion-resistant aluminium EN AW 6082 (seawater 2; atmospheric condition 1), nickel plated, varnished _{* Comparative evaluation from 1 (very good) to 6 (unsuitable)}
Approvals:	EC Type Examination Certificate according to 2014/68/EU (Pressure Equipment Directive) DIN EN 298:2012-11 CE Declaration of Conformity 2009/142/EC (Gas Appliance Directive) 2014/68/EU (Pressure Equipment Directive) ANSI / UL 1998, 2nd Edition in Combination with ANSI / UL 372, 5th Edition and UL353, 5th Edition Available with Class I, Division 2, Group A, B, C, D, Hazardous Locations

Purpose

In single-burner and multiple-burner furnaces, the flame detector performs a high-safety monitoring of the burner flames. When the flame switches off, the safe control state “Flame off” is reached.

The flame detector is mainly used in large-scale power plants, thermal power stations and chemical plants as well as for monitoring furnaces which are operated with:

Oil
Gas
Bio-mass
Dust coal
Chemicals and other waste products

Selection Criteria

Type	Spectrum / nm	Preferred application / fuels
F200K1 UV-2 F200K2 UV-2	210 … 380	Oil, gas (special gases of refinary- or blast furnaces)
F200K1 UV-3 F200K2 UV-3	210 … 380	Oil, gas (special gases of refinary- or blast furnaces)
F200K1 IR-2 F200K2 IR-2	850 … 1200	Oil, gas, coal, firing with high flue gas recirculation, waste gases with yellow colour without UV-radiation respectively with absorbtion of the UV-radiation by vapor or dust etc.
F200K2 IR-1 F200K2 IR-1	1200 … 2800	Coal dust

F200K Ex

Compact case with integrated flame sensor and dual amplifier for fail safe operation
Intensity adjust in multiple steps
Digital circuit design for flame evaluation
Status indication by LEDs
24 VDC operating voltage
Two electronic channel system for fail safe operation and supervision
LED bar flame intensity indication and 4 (0) … 20 mA analog output
SIL 3 following DIN EN 61508-2

Tecnical Data

Power supply:	24 VDC ± 20 %, ≤ 4,0 W
Output contact:	≤ 42 VDC, ≥ 6 VAC/DC ≤ 0,5 A, ≥ 1,0 mA floating
Frequency range:	10/20/30 … 190 Hz
Safety time “operation”:	t ≤ 1 s (standard) t ≤ 3 s (on request, at the factory)
Mode of operation:	Continuous operation
Protection class:	IP66 / IP67 NEMA 4X
Operating temperature:	-20 °C … +60 °C
Dimension:	Total length: 216 mm Diameter: 60/90 mm
Weight:	2 kg
Material:	Corrosion-resistant aluminium EN AW 6082 (seawater 2; atmospheric condition 1), anodised _{* Comparative evaluation from 1 (very good) to 6 (unsuitable)}
Approvals:	EC Type Examination Certificate according to 2014/68/EU (Pressure Equipment Directive) DIN EN 298:2012-11 SIL 3 Confirmation DIN EN 61508 Part 2 CE Declaration of Conformity 2009/142/EC (Gas Appliance Directive) 2014/68/EU (Pressure Equipment Directive)

Purpose

After establishing the compact flame monitor F200K successfully and it is proven that it is at its best with combustion of any kind (oil, gas etc.), LAMTEC now offers this compact flame monitor in explosive proof design for different issues.
The following type shows a wide range of applications for combustion plants especially for the chemical or petrochemical industry.

Sensitivity features:

2 sensitivity sections
6 steps selectable for each sensitivity section
externally switchable
Increased sensitivity in section 2

Selection Criteria

Type	Spectrum / nm	Preferred application / fuels
F200K1 UV-2 Ex F200K1 UV-2 Ex II F200K2 UV-2 Ex F200K2 UV-2 Ex II	210 … 380	Oil, gas (special gases of refinary- or blast furnaces)
F200K1 UV-3 Ex F200K1 UV-3 Ex II F200K2 UV-3 Ex F200K2 UV-3 Ex II	210 … 380	Oil, gas (special gases of refinary- or blast furnaces)
F200K1 IR-1 Ex F200K1 IR-1 Ex II F200K2 IR-1 Ex F200K2 IR-1 Ex II	1200 … 2800	Oil, gas, coal, firing with high flue gas recirculation, waste gaseswith yellow colour without UV-radiation respectively with absorbtion of the UV-radiation by vapor or dust etc.

F300K

3 operating modes
14 frequency ranges
Available as single or double sensor (IR/UV)
Degree of protection IP67
Flame ON/OFF self-learning function
Operation via graphic User Interface with status display (optional)
SIL 3 according to DIN EN 61508 part 1-7
Available with Class I, Division 2, Group A, B, C, D, Hazardous Locations

Tecnical Data

Supply voltage:	24 VDC ± 20 % ≤ 3,5 W
Flame and fault contact:	≤ 50 VDC, ≥ 6 VDC ≤ 0,5 A, ≥ 1,0 mA floating
Frequency range:	10 / … / 110 … 210 Hz 7 levels in the standard version
Safety time “Operation”:	t ≤ 1 sec. (standard) t ≤ 1, 2, 3, 4, 5 sec. (selectable via password)
Operating mode:	Continuous operation
Degree of protection:	IP66 / IP67 NEMA 4X
Operation temperature:	-40 °C … + 85 °C
Dimensions (HxT):	99×195,5 mm
Weight:	1,05 kg (aluminium) 3,6 kg (stainless steel)
Material:	Corrosion-resistant aluminium EN AW 6082 (seawater 2; atmospheric condition 1), anodised or stainless steel _{* Comparative evaluation from 1 (very good) to 6 (unsuitable)}
Approvals:	EC Type Examination Certificate according to 2014/68/EU (Pressure Equipment Directive) DIN EN 298:2012-11 SIL 3 Confirmation DIN EN 61508 part 1-7 CE Declaration of Conformity 2014/35/EU (Low Voltage Directive) 2014/30/EU (EMC Directive) 2014/68/EU (Pressure Equipment Directive Cat. 4 module B+D) 2009/142/EC (Gas Appliance Directive) ANSI / UL 1998, 2nd Edition in Combination with ANSI / UL 372, 5th Edition and UL353, 5th Edition Type examination certificate Ex Zone 2 Available with Class I, Division 2, Group A, B, C, D, Hazardous Locations

Purpose

The compact flame monitor is a safety device and complies with the following standards among others:

DIN EN 298 for gas operation
DIN EN 230 for oil operation
IEC 6158, SIL 3

Directives:

2014/68/EU (Pressure Equipment Directive)
2009/142/EC (European Gas Appliances Directive)
Field of application:
Combustion plants with and without selection tasks
Single and combi-burners
Power plants, heating plants, process combustion,

Fuels:

Oil
Gas
Dust
Biomass
Coal
Process gases

Selection Criteria

Type	Spectrum / nm	Preferred applications / fuels
F300K UV-4	215 … 360	Oil Gas Special gases such as refinery gases, blast furnace gases and hydrogen
F300K IR-2	850 … 1200	combustion chamber monitoring
F300K IR-3	1000 … 1700	Oil, gas, wood, coal and dust-fired furnaces with a high level of flue-gas recirculation Yellowish waste gases without UV radiation or with shielding of the UV spectrum by water vapour and dust
F300K IR-4	1000 … 2200
F300K UVIR-1	215 … 360 850 … 1700	UV:Oil, gas, special gases like refinery gases and furnace gases IR: Oil, gas, wood, coal, dust furnaces with strong flue-gas recirculation, waste gases with yellowish colour without UV radiation or with shielding of UV components using water vapour and dust