Graphical Customer Interface GKI300
LAMTEC’s GKI300 Graphical User Interface offers data visualisation for combustion plants. By using a 10-inch touchscreen monitor, the GKI300 is enabling graphical representation and burner control:
- ETAMATIC
- ETAMATIC OEM
- FMS
- BT300
Display (only valid for the 10″ standard version of the GKI)
| LCD size: | 10,4″ |
| Max. resolution: | 1024 x 768 pixels |
| Mounting: | Panel, rack, and swivel arm VESA 100 x 100 mm/3.93″ x 3.93″ in |
| Touchscreen: | Resistive, 4-wired |
| CPU (processor): | Intel® Atom™ N2600 (optional N2800) |
| Memory: | 2 GB 533 MHz DDR3 SO-DIMM pre-installed (4 GB max. f. N2800) |
| Power supply: | 8-36 V |
| Power consumption: | 7 W |
| Operation temperature: | -25 °C … +75 °C/-13 °F … +167 °F |
| Dimensions (HxWxD): | 202 x 235 x 31 mm/7.95″ x 9.25″ x 1.22″ in |
| Weight: | 2,2 kg/4.85 lb |
GKI300 is comprised of an independent PC with a 10-inch touchscreen. For control purposes, LAMTEC VISIOCONTROL software is used, which is usually pre-installed. After start-up, a graphical representation of the burner would be displayed for the user to visualise. The following menus are available:
- Refresh
- Burner operation
- Fuel-air ratio curves
- Firing rate controller
- CO/O2 control
- NEMS fault indication
- Close application
- Data setting
- Fault history
All relevant information about the combustion plant would be displayed. At the same time, setpoint curves can be read and firing rate values can be preselected. The burner itself can be switched on or shut-down by GKI300. In the fault history list, the last 10 faults are saved and can be displayed.
Graphical customer interface
for panel mounting, consits of:
- Graphical customer interface, installed on 8,4″ touchscreen panel PC
- Panel mounting kit
for wall mounting, consits of:
- Graphical customer interface, installed on 8,4″ touchscreen panel PC
- Wall mounting kit
for panel mounting, consits of:
- Graphical customer interface, installed on 12″ touchscreen panel PC
- Panel mounting kit