Burner Tronic BT300
- Modular burner control
- 3 channel fuel/air ratio
- CO/O2 control optional
- Electronic fuel/air ratio control system
![](https://bumimega.com/wp-content/uploads/2022/10/csm_burnertronic_bt300_02_ccb806f075.jpg)
Power supply: | 230 VAC +10/-15 % 47-63 Hz 115 VAC +10/-15 % 47-63 Hz (on request) |
Power consumption: | Max. 30 VA |
Digital outputs: | 3 fuel valves max. 1 A cos φ 0,4 VL fan max. 2 A cos φ 0,4 oil pump max. 2 A cos φ 0,4 ignition transformer alarm output |
Housing: | Polycarbonate + ABS |
Weight: | 1,0 kg |
Approvals:
| EC Type Examination Certificate (Module B) according to Directive 2014/68/EU
EC Type Examination Certificate according to 2009/142/EC (Gas Appliance Directive)
SIL 3 Confirmation
CE Declaration of Conformity
MH48669
|
The BT300 combines the benefits of an electronic fuel-air ratio control system with up to three motorised actuating devices and an optional modules like an analogue output for speed control of the combustion air fan with an electronic burner control unit. The leakage test, flame monitoring system, power control unit and (optional) CO/O2 controller for control and optimisation of an oil or gas-fired forced-draught burner are all integrated.
The BT300 is suitable for virtually all combustion plants. Safety interlock chains, monitors (e.g. gas and air pressure) and sensors are wired directly to the BT300. This greatly reduces the cost of additional relays and wiring. The BT300 was designed to be attached to the burner.
The short wiring paths also save money. As a result, the BT300 is particularly suitable as standard equipment for monoblock burners.
The compact design of the BT300 burner control system also has its advantages during commissioning. Standardising the wiring and the unified operator interface minimises sources of errors from the start, while intelligent information in the display makes searching for errors much easier.
Function | Communication | Optional |
Start-up counter
|
|
|
Operating hours
|
LAMTEC system bus (LSB)
|
|
Burner control unit
|
|
|
Compound regulator
|
| |
Leakage test
|
| |
Flame monitoring
|